Storage Buffering in mineral processing plant

In mineral processing plant,Buffer storage is some time called “the key to processing”, meaning that without a proper storage throughout a continuous rock or mineral process, production uptime will be gone.
Storage in operation
The main purpose of storage is to smooth out:
• Different production rates (cont.cyclic)
• Shift variations
• Interruptions for repair
• Size variations
• Flow variations
• Variations in mineral value (metal content etc.)
Storage of rock (1)

A matter of material flow (retention time),see below the crushing system of lead zinc ore processing:
Storage of ore and minerals (2)
A matter of material flow (retention time) and blending
sinonine can also provide sand washing plant epc.
Sinoninetechnology team

评论

发表评论

此博客中的热门博文

How to extract silica sand from kaolin tailings?

图片
This paper describes in detail the method of extracting silica sand from sandy kaolin tailings, which can make full use of tailings and improve the application value of kaolin tailings. Its silica sand concentrate fully meets the requirements of glass quartz sand index. Kaolin and its tailings Kaolin is an important non-metallic mineral material. It is not only a necessary raw material for building materials, light industry and other traditional industries, but also a basic material for the development of modern industry. Kaolin mineral resources are continuously exploited and utilized, and a large number of tailings will be produced in the process of mining and processing of kaolin, and the number of tailings will increase year by year. The continuous accumulation of tailings occupies a large amount of land, which affects the ecological environment and also causes the waste of mineral resources. The treatment methods of Kaolin Tailings mainly include: building t
阅读全文

METALLURGICAL EFFICIENCY

图片
One of the most important and basic concepts in beneficiation plant is metallurgical efficiency. Two  terms are commonly used to describe the efficiency of metallurgical processes: recovery and grade . These phenomena are illustrated in the generalized process presented in Figure 1. In above example, 100 tph of ore are being fed into a concentration operation that produces 4.5 tph of concentrate and 95.5 tph of tailings. In upgrading this process, then, 1.0 tph of the desired material, A, is introduced into the unit operation and 0.9 tph (4.5 × 0.2) of this material reports to the concentrate, resulting in 90% recovery (0.9/1.0 × 100). The grade of the mineral, A, has been improved from 1% to 20%. The term percent recovery refers to the percentage of the valuable material reporting to the concentrate with reference to the amount of this material in the feed. Note that obtaining the highest possible recovery is not necessarily the best approach in a concentration process. High rec
阅读全文

The Slurry Line

图片
Slurry pumps are important being the energy source in all hydraulic systems for slurry handling. However, the slurry pumps are mainly just energy converters in the systems (converting electric energy to hydraulic flows). Equally important is to design “the slurry line” with the correct sizing of hoses (or pipes) including • Hose lay-out geometry (vertical and horizontal) needed for the transportation job • Hose material giving resistance to the wear and to the chemical environment • Hose diameter enabling maximum efficiency of the slurry system SLURRY OPERATIONS Grinding Classification Separation Sedimentation Mechanical dewatering Hoses are for slurry handling what conveyor belts are for dry materials handling. Simple products – which just have to maintain their functions. Otherwise the process flow will be interrupted and the up-time is gone. There is just one rule for lay-outs of slurry hoses and pipes, but a golden one. “ Never use sharp bends when co
阅读全文