博文

目前显示的是标签为“mining machine”的博文

Hydrocyclone Classifiers

图片
In beneficiation plant , Hydrocyclones is an important mining machine and use centrifugal forces to classify particles in a fluid that experiences essentially free vortex motion inside the device. They are widely used in mineral processing plants today because of their extremely favorable capacity-to-size ratios and reasonably low maintenance. Basic Characteristics of hydrocyclone A cutaway view of a typical hydrocyclone is shown in Figure1. Feed slurry, either pumped or flowing by gravity, enters the inlet through a feed pipe and flows at a tangent to a cylindrical feed chamber under pressure. To increase retention time, a cylindrical section is often added between the upper feed chamber and the lower conical section. This section has an included angle (cyclone angle) in the range of 12° (for cyclones of 10-in. diameter or less) to 20° (for larger cyclones). Fine particles leave through the vortex finder and are directed to further processing by the overflow pipe. Coarse partic...

Tumbling Mill Grinding Devices

图片
The various mining machine including grinding devices used in the industry are distinguished in terms of the manner by which energy is introduced into the system and in terms of capacity and particle transport into and out of the mill. Each device is characterized with respect to particle size range, design relationships, wear, and efficiency of energy utilization. For some grinding devices, well-defined design relationships have not been established, and in these cases detailed data on typical installations are given when available. Similarly, wear data for some grinding devices are not always available, especially for the more recently developed mills that have not been used extensively on an industrial scale. In addition, the wear characterization is difficult to generalize because it is highly dependent both on the nature of the feed and the materials of construction. The efficiency characterization is the free-crushing efficiency and represents that portion of the total energ...

Dust collection and noise control in beneficiation plant

图片
Dust and noise are two main working environment problems in beneficiation plant . Although the auxiliary equipment like dust collectors are not main mining machine in plant, they are Equally important. There are many good measures to deal with dust and noise problems and widly used in many plants such as iron ore processing plant, gold beneficiation plant , coal plant etc. 1.Dust collection The dust removal and dust collecting systems are very similar to a normal dry classification circuit. Dry classification is in fact a dust removal system where the max size of the dust is controlled by a classifier (or ventilation criteria), See figure 1 . igure 1. dust collection system Primary recovery of dust is normally done in a cyclone taking the major part. The final recollection is done in a wet scrubber or a fabric filter. Wet scrubber has an advantage over fabric filter when the dust is combustible. In all other cases the dry fabric filtration is more effective as no slud...