博文

目前显示的是标签为“flotation machine”的博文

Ore Crushing and grinding circuits

图片
In a mineral processing plant individual pieces of comminution equipment are almost never used alone, but rather appropriate“stages” of size reduction are used in a plant to transform the material from the run-of-mine size to the final product size and then go to beneficiation stage such as flotation machine , gravity machine, magnetic equipment etc . The appropriate selection of equipment on a stage-by-stage basis is determined by feed size, ore type, tonnage, and final product size. Table 1 lists the size ranges within which various comminution methods operate most efficiently. The fact that the inherent efficiency of some devices is higher than others causes circuit designers to select equipment that produces a favorable overall efficiency. Table 1. Normal size range and approximate energy efficiencies for various devices In addition to taking into account inherent device efficiency in circuit design, the use of interstage size separation equipment will be shown in this ...

Flotation Circuits

图片
Sinonine deeply know that in a mineral processing plant , flotation is carried out as a continuous operation in a series or bank of cells. This increases the floating time, allowing ample opportunity for particle-bubble attachment to occur. The residence time of particles in the bank of cells range from 5 to 15 minutes. The rate at which the particles float will depend on particle composition, pulp density, particle size and degree of turbulence in the cell. The arrangement of a number of cells in series allows the collection of different products from the various cells. For example, liberated particles in general float more rapidly than composite particles so that a high grade concentrate can be collected from the first few cells in a bank and froth from the remaining cells can be collected as a middling concentrate. Quite often the grade of concentrate recovered from a single stage of flotation is not high enough and requires re-floating in one or more stages of flotation referred...

XCF/KYF flotation machine

图片
XCF/KYF flotation machine  1. Application and Characteristics (1) This machine belongs to deep-groove-type gas-filled mechanical stirring floatation machine with two types in design: XCF-type with ore pulp sucking capacity, KYF without ore pulp sucking capacity. If these two machines are used jointly, that is, the first trough in each operation is provided with XCF floatation machine , and other troughs are provided with KYF floatation machine , horizontal configuration is arranged among the operating units, foam returning does not need foam pump. If the KYF floatation machine is used independently, ladder configuration is required among various operation units, and foam returning needs foam pump. This machine is appropriate for rougher flotation and selection operation in large and medium-sized concentrating mill, which can select non-ferrous metals, ferrous metals and non-metal minerals with selected material particle scope of 0.3~0.01mm(-0.074mm, content of size fraction ...