Sinonine has Implemented Auto control system for the entire beneficiation plant

Sinonine’s R&D team continuously upgrade and improve beneficiation automation system. According to such characteristics in the entire mineral process as complicated working condition, nonlinearity, variable time lag and multi-variable coupling, the Auto-control System for the Entire beneficiation plant, through synergic control over the key variables in a beneficiation plant, generally reduces the production costs in a beneficiation plant and increases the production benefits with such a result as general benefits being higher than the benefits obtained from the independent control over the variables in different processes in the factory. It is one set of automatic optimization system with high adaptability and has had numerous successful cases in mineral natures as magnetite, copper ore, gold ore, molybdenum ore, nickel ore, bauxite, graphite ore, lead-zinc ore, etc.
System characteristics
1.Detection, display and control of many key parameters make the system more accurate and complete.
2.Highly reliable instrument combination makes the system run reliably and stably, with a long service life.
3.Fuzzy control, neural network control and other advanced control theories make the control effect become the best.
4.Excellent control software design makes the system more intelligent.
5.Automatic control, manual control, soft manual control and other control modes make the system much easier for management and adapt to different processing plant operating practices;
System benefits
1.Stabilize plant production, and cut down the fault rate of equipment;
2.Improve the output and grade of concentrate and increase the recovery rate of metals;
3.Improve the equipment operation rate and reduce the labor intensity of workers;
4.The investment can be recovered soon with high yield.

Sinonine’s beneficiation automation system improves the efficiency of beneficiation, reduces manpower cost, and provides customers with better and cheaper services. Beneficiation automation system combines flotation machine, Jaw crusher  and ball mill and other mining machines for gold mining equipment and lead-zinc mining and iron ore processing and other kinds of mineralprocessing plant. Sinonine provide customers with high efficiency,  low cost of ores mine enrichment solution.

For more information, contact:
Tel: +86-25-58875679
e-mail: info@sinoninetech.com
Skype: JerrySinonine
Website: www.sinoninetech.com
Web: http://www.sinoninetech.com/index.php/Home/About/show/id/79.html
Sinonine  is a leading mining equipment manufacturer and mining engineering EPC service provider in China. Sinonine has been dedicated to provide more professional beneficiation plant EPC service with advanced products for customers more than 10 years, and our clients spread all over the world.  All of Sinonine’s products and services are very affordable with good quality.
sinonine can also provide sand washing plant epc.

评论

发表评论

此博客中的热门博文

METALLURGICAL EFFICIENCY

图片
One of the most important and basic concepts in beneficiation plant is metallurgical efficiency. Two  terms are commonly used to describe the efficiency of metallurgical processes: recovery and grade . These phenomena are illustrated in the generalized process presented in Figure 1. In above example, 100 tph of ore are being fed into a concentration operation that produces 4.5 tph of concentrate and 95.5 tph of tailings. In upgrading this process, then, 1.0 tph of the desired material, A, is introduced into the unit operation and 0.9 tph (4.5 × 0.2) of this material reports to the concentrate, resulting in 90% recovery (0.9/1.0 × 100). The grade of the mineral, A, has been improved from 1% to 20%. The term percent recovery refers to the percentage of the valuable material reporting to the concentrate with reference to the amount of this material in the feed. Note that obtaining the highest possible recovery is not necessarily the best approach in a concentration process. High...
阅读全文

Mineral processing unit operation and examples

图片
UNIT OPERATIONS In mineralprocessing plant , Numerous steps, called unit operations, are involved in achieving the goal of extracting minerals and metals from ores in their purest possible form. These steps include Size reduction . The process of crushing and grinding ores is known as comminution. The purpose of the comminution process is threefold: (1) to liberate valuable minerals from the ore matrix, (2) to increase surface area for high reactivity, and (3) to facilitate the transport of ore particles between unit operations. Size separation. Crushed and ground products generally require classification by particle size. Sizing can be accomplished by using classifiers, screens, or water elutriators. Screens are used for coarse particulate sizing; cyclones are used with fine particulates. Concentration . Physicochemical properties of minerals and other solids are used in concentration operations. Froth flotation, gravity concentration, and magnetic and electrostatic co...
阅读全文